Concrete Look Dollar Store Pumpkins

If you have been in pretty much any dollar store in the last month or so you have likely seen lots of bright orange light-weight pumpkins.  El cheapo looking pumpkins.  But, for some reason, they inspired me in a big way.  I bought a couple of them and before I had even gotten out of the store, I knew what I wanted to do with them.  Happily enough, they turned out exactly how I envisioned them!

Concrete Pumpkin

I love them!  The process, once I figured it out was quite easy.  It took some trial and error, so to help you avoid all that, I will show you the easy way to make these concrete look pumpkins.  First, though, my base ingredients:

WP_20151104_002 1

I had noticed this half used bag of thin-set mortar in our garage recently and wondered what a person actually does with it once the tile job is done.  The trial and error portion of my project consisted of just mixing water with the thin-set mix and painting it on.   Not wanting to use a nice bowl to mix the stuff in, I cut down a gallon sized milk container.  The handle made it really easy to hold while I stirred.  I used the top part for my scoop.  See what it looked like after one coat:

WP_20151104_003 1

Too transparent for the look that I was going for so I made some changes to my thin-set mix.  First I added some white paint and then decided to add some Plaster of Paris powder, as well.  I didn’t have any specific recipe, just added until it was the consistency of pancake batter.  A couple more coats (let it dry completely first) and this is what they looked like:WP_20151106_008

As you can see, I added some short twigs to make stems for my pumpkins.  At first I added a silk leaf to the top, but removed it because I liked the starker look.  Can I just say that I’m loving the white pumpkin look this year?  Truth be told, however, these could be made in any color… of course your paint color will dictate that.  It would be fun to make gray or peacock blue or black concrete pumpkins, don’t you think?

White and chic pumpkin
White and chic pumpkin
White pumpkins!
White pumpkins!

Since these pumpkins are made of Styrofoam, they can be easily pierced on the bottom and place on a candlestick that has a “nail” for holding candles in place:

WP_20151106_005

Isn’t it amazing how just a few items found in most garages can make el cheapo look high end?  I’m loving my new pumpkins and plan to make several more in different sizes next year.

So, what do you think?  Are you still there, or are you grabbing the car keys and heading to your local dollar store to buy some pumpkins?

 

********* Linking up to these awesome parties!*********

I was FEATURED!  What an honor!

Great Ideas — 18 DIY Thanksgiving Ideas Part Two!

 

Welcome to 31 Days

 

Super Saturday Craft Day

SuperSaturday2015

One of my favorite things to do this time of year is to help organize a “Super Saturday” at my church.  Super Saturday is a day where the women from church and their friends, family, neighbors…can come together and craft.  This event is always in November so we can make holiday decorations as well as inexpensive gifts for Christmas giving.  I just thought that I would share what we are doing this year:

This Snowman/Scarecrow craft was requested by someone who had seen a similar craft online using planks.   As you can see, this craft is reversible, making it possible to have it out from October through January.  Love that!  I will do a tutorial on this soon.  Promise!  ***UPDATE: Here is the tutorial***

WP_20151104_009 WP_20151104_010

This 2 minute craft  is great for display as well as for holding a plate of holiday goodies.  It is as simple as removing the backing from the vinyl sticker that I cut with my Roland Dr. Stika machine, placing the sticker and rubbing it to smooth it out, then removing the masking layer.  Easy peasy!  I love how simplistic it looks.

WP_20151104_011

I found some little wood boxes that I thought would make perfect little chalkboards.  Before Super Saturday, I will paint the boxes white.  That day we will add a vinyl frame to use as a stencil.  After painting with chalkboard paint and letting it dry (we always use hair dryers at Super Saturday to speed up the drying process!), we will remove the frame vinyl to expose the white below.  I’m also going to do a quick demo about how to easily “write” on chalkboards.  I love that this little guy can stay up year round.  I love, love, love chalkboards and the fact that “art” can change in a matter of seconds.

WP_20151104_012

We are also going to do a demo of how to make a 5 minute pillow cover.  Soooo easy!  Here is a great video tutorial to show you how it’s done and here is one of the many pillows that I have made this way:

WP_20151104_013

Lastly, here is a craft that I patterned off of one that my friend found online and loved.  I made sure to use an image that is copyright free of the LDS Salt Lake Temple spires.  We will decoupage that as well as the saying, “Families are Forever”.  This idea can be used in a thousand different ways, using different pics (pics of children and grandchildren, family home…) and sayings.  I drilled tiny holes in each corner of the word wood so I could easily insert little brads for added detail.  I also drilled a couple of larger holes on the top for the ribbon to go in and, BAM! it’s a fabulous item to hang in your own home or to give as a gift.

WP_20151104_014

I’m so excited for this Super Saturday event…I can hardly wait!  It is so much fun to turn on the Christmas tunes and work and laugh and craft with friends.

Do you participate in a similar crafting event?   If you are not aware of a similar event around you, why don’t YOU get one started?  Grab your friends and family and get crafting!  You just might end up with some pretty cool stuff and warm memories as a result.

 

********* Linking up to these awesome parties!*********

Welcome to 31 Days

Textured Wooden Pumpkin

Textured Wooden Pumpkin2

Fall is in the air…isn’t that exciting?  Around here, that means that we are no longer having triple digit temperatures.  Woo hoo!  With daytime highs of less than 85 degrees and night time lows in the 50’s, I’m in the mood for everything Autumn.  The other day I got the hankering to just make something new to add to my Fall decorating.  I gave myself a challenge.  Do you ever do that?  My challenge was that I would use materials that I already own and create something I’ve never seen before.  Here is what I decided to work with:

WP_20150923_010

Some stained old textured wallpaper and 3 scrap pieces of 2×4 left over from a garage shelving project.  Are you inspired?  I was.  Wanna see what I made?

WP_20151027_001

Turned out okay, don’t you think?  I happen to love it!  Would you like to see how I made it?  Alright.  Here we go:

Textured Wood Pumpkin collage

First step, I cut out the textured wallpaper.  I wanted a continuous pattern so I traced around the 2×4’s, stacked vertically, on the back side of the wallpaper.  After cutting out the wallpaper, I glued a strip down on each of the 2×4’s using regular white glue.  Easy.  To make sure that it didn’t bubble, I stacked them up and weighed them down with books.  As the glue dried I made up a pattern.  Kind of.  I’m not an artist so I went to the computer and found a basic pumpkin template.  I printed it out then cut the image in 4 pieces so I could stretch it out to make a larger size.  After taping it down to a large sheet of (pieced together) paper, I drew in my own lines.  Next step, I cut out the paper template and then transferred the pumpkin shape to my textured wallpaper 2×4’s, again making sure that the pattern was continuous.

After cutting the individual pieces out, I sanded random dents in the edges to make them more rounded and textured. See?

WP_20150929_007

I wanted the pumpkins to look nice and finished and not thrown together so I made sure to “caulk” the edges with spackling.

WP_20150930_001

See how much better the spackled part looks?

I chose to paint my pumpkin a nice white, but orange, black, aqua or teal would be equally nice.  I had originally painted mine black with the intention of sanding the edges to allow the black to show through, but ended up liking the white, un-distressed look.

My stalk is a cut piece of a branch from a tree in my yard.  If wishes were fishes, I would have made it longer, but by the time that I decided that, the darn thing was too attached to remove.

WP_20150930_003

Once the paint dried, I assembled the pieces:

A few twist of baling wire forms the tendrils.  I also added some silk leaves and some natural raffia…

And, there you have it… a finished pumpkin.

WP_20151002_003

I’m kind of liking my new pumpkin.  What do you think?

WP_20151027_005

********* Linking up to these awesome parties!*********

———This post was FEATURED!!!———–

Live Randomly SimplePieced Pastimes

http://www.cozylittlehouse.com/2015/11/tweak-it-tuesday-166.html

Welcome to 31 Days

Funky Junk Interiors: DIY Salvage Junk Projects

Intelligent Domestications  101 + Pumpkin Decorating Ideas:

Easy DIY: Distressed Metal Art

Chippy Metal Art

Check out this awesome piece of metal art that I bought 4 years ago at Ross.

IMAG00853

I thought that the design was okay-ish and the size, awesome (3 feet by 3 feet),  but above all, I loved the price:

IMAG00855

7 bucks?  That, I can do! I’m thinking that it was discounted because it was kind of scraped up in a few places…

IMAG00854

…which is ok since I didn’t like the finish on it anyway.  So after moving it from place to place in my garage for the past 4 years, it got some attention today, and I LOVE it!

IMAG00862

Wanna see how I did this uber-easy project?  Of course you do!  First I grabbed a can of black spray paint and mainly focused on painting the edges and raised portions:

Sorry, the dappled sunlight makes it kind of hard to see, but if you look at the upper left corner of the above pic, you can kind of see the black edges which will be visible once the piece is distressed.   Next, came two coats of a semi-gloss white paint:

IMAG00859

Of course I could have called it “Done” at this point if I was going for a clean modern look, but I wanted to take it a step further and distress it up a little to highlight some of the details.  Of course that is why I painted it black in the first place.

***Very Important*** If you plan to do a similar project, spray the top coats with only a short time between coats and distress while the paint is still a bit tacky.  They make spray paint so well these days that it dries to form a really tough surface, which is really what we want, right?  SO, if you are distressing spray paint, you have just a short window of time to accomplish that task.  Even though the distressing process took me about 10 minutes, I could tell a big difference between how easy it was when I started, compared to when I was finished.  Work fast, ok?  If, heaven forbid, you miss that window of time, you can try using some fingernail polish remover and a Q-tip like I did with my metal star project.   Just make sure that you change Q-tips often to avoid a smudgey look.  Got it?  Good!

Now, do you want to see my high-tech distressing tool?  Of course you do:

IMAG00866

Let me be honest:  I started out by using my thumbnail and realized that I would likely wear it away to nothing so I figured that a plastic spoon would do the trick and it did.  Sometimes I scraped away with the spoon part…

IMAG00860

…and sometimes I used the handle to cover more area at a time…

IMAG00861

Here is the finished project…

IMAG00862

…which I LOVE!!!  With the new finish, it is no longer “okay-ish”, it is fabulous.  I thought that I knew exactly where I was going to place this baby, up high in my dining room, but now I want it more front and center.   Hmmm.  The easy part was re-creating this piece.  The hard part is deciding where to put it:

What do you think?  Where should it go?

 

Yep, I can honestly say that I love this piece.  Love!   So, do you have something hidden away in YOUR garage that could use a couple of coats of paint and a spoon?

 

********* Linking up to these awesome parties!*********

 

 

 

Updated Metal Star

Once upon earlier this morning, I had a metal star that looked like this:

IMAG00759

I bought this 28 inch metal star at a garage sale about 5 years ago for $1.  Loved the price, but I wasn’t crazy about the finish.  Still, I slapped it up on my wall and forgot all about it.   It was up high enough that the unfortunate color and scraped-off paint didn’t really look too bad against the beige wall it was hanging on.  As you may or may not know, I’m going gray in my house.  The metal star came down so the gray paint could go up.

I will give you a preview of what this star looks like now:

IMAG00777

Kind of looks like something that you would see in the aisles of Hobby Lobby, doesn’t it?   Do you wanna know how I got this look?  So easy!  First I spray painted the whole thing black and once that dried, I sprayed on 2 coats of a nice shade of aqua:

I tell you, spray paint these days dries so fast.  Of course, the reason that I painted the star black in the first place is because I wanted to be able to distress it and have black showing through the aqua.  You already knew that, right?

To distress projects that I paint with water-based paints, I usually rub the areas that I want exposed with a damp rag or scrubbing sponge, but water really didn’t have the same effect with spray paint.  I ended up going with pure acetate nail polish remover.  I messed around using the scrubbing sponge…

IMAG00764

…but ended up liking the look achieved by using Q-tips and cotton balls the best.  As the acetone hits the paint, it tends to smear the black beneath into the top coat so I messed around with that a bit :

Here’s some practical advice:  be smart and wear gloves.  Trust me on this one.

IMAG00770

After re-spraying the portions that I over-distressed (which was way easier than I thought it would be) I favored using the Q-tips.  Be prepared to use a lot of Q-tips to avoid a smeary look.  Really, it is so super easy.

IMAG00773

Perched on the same screw that it originally hung from, my updated star really shines.  Never to be ignored or forgotten again.  I must say that I L*O*V*E the finished project.

Updated Metal Star

What do you think?

 

********* Linking up to these awesome parties!*********