Concrete Look Dollar Store Pumpkins

If you have been in pretty much any dollar store in the last month or so you have likely seen lots of bright orange light-weight pumpkins.  El cheapo looking pumpkins.  But, for some reason, they inspired me in a big way.  I bought a couple of them and before I had even gotten out of the store, I knew what I wanted to do with them.  Happily enough, they turned out exactly how I envisioned them!

Concrete Pumpkin

I love them!  The process, once I figured it out was quite easy.  It took some trial and error, so to help you avoid all that, I will show you the easy way to make these concrete look pumpkins.  First, though, my base ingredients:

WP_20151104_002 1

I had noticed this half used bag of thin-set mortar in our garage recently and wondered what a person actually does with it once the tile job is done.  The trial and error portion of my project consisted of just mixing water with the thin-set mix and painting it on.   Not wanting to use a nice bowl to mix the stuff in, I cut down a gallon sized milk container.  The handle made it really easy to hold while I stirred.  I used the top part for my scoop.  See what it looked like after one coat:

WP_20151104_003 1

Too transparent for the look that I was going for so I made some changes to my thin-set mix.  First I added some white paint and then decided to add some Plaster of Paris powder, as well.  I didn’t have any specific recipe, just added until it was the consistency of pancake batter.  A couple more coats (let it dry completely first) and this is what they looked like:WP_20151106_008

As you can see, I added some short twigs to make stems for my pumpkins.  At first I added a silk leaf to the top, but removed it because I liked the starker look.  Can I just say that I’m loving the white pumpkin look this year?  Truth be told, however, these could be made in any color… of course your paint color will dictate that.  It would be fun to make gray or peacock blue or black concrete pumpkins, don’t you think?

White and chic pumpkin
White and chic pumpkin
White pumpkins!
White pumpkins!

Since these pumpkins are made of Styrofoam, they can be easily pierced on the bottom and place on a candlestick that has a “nail” for holding candles in place:


Isn’t it amazing how just a few items found in most garages can make el cheapo look high end?  I’m loving my new pumpkins and plan to make several more in different sizes next year.

So, what do you think?  Are you still there, or are you grabbing the car keys and heading to your local dollar store to buy some pumpkins?


********* Linking up to these awesome parties!*********

I was FEATURED!  What an honor!

Great Ideas — 18 DIY Thanksgiving Ideas Part Two!


Welcome to 31 Days


DIY Decorative Mirror Frame


Have you every used Gallery Glass products that help create stained glass looks?  I love the stuff!  My favorite is Crystal Clear (as if clear could be called a color):


This is what it looks like.  My sister-in-law knows that I love this product and got me like 10 bottles of it when she saw it clearanced out.  Thanks, Kinna!!!  Now I can come up with all kinds of projects to make.  Trust me, I’ve got ideas!  Oh, and lest you think that Gallery Glass sponsors me…nah.  I’m not that cool.  I just like this stuff!

So, a couple of months ago I picked up a square framed mirror at the dollar store.  I bought it with absolutely no idea what I was going to do with it.  I like square stuff, remember?  Today I was doing some organizing and came across my G.G. stash (thanks again, Kinna!) and immediately formed an idea of what to do with the square framed mirror.  Want a sneak peak?


Question… have you ever tried to take a picture of a mirror?  Not that easy, let me tell you.  Just so you know!

So, let me walk you through the process from dollar store to finished art.  Ready?  Let’s go!

First thing, I cut up a 4×4 piece of sticker paper and placed it smack dab in the middle of the frame.  You could just use tape if you want.  You might as well know that I did this project twice.  First, using the tip of the bottle, I just made big squiggles:

It was ok, but not great, so I just scraped it off and started over again.  No tears, now worries.  Next try, I just smeared a layer of G.G. over the whole mirror.  I didn’t really take any pics because I used my fingers to smear the stuff around.  Messy.  I used Q-tips to make my design.  Basically, I just wiped vertical “stripes” and then horizontal.  I truly wasn’t going for perfection, more of a playful look.  Really, the sky is the limit when comes to the textured looks you can create with this product.


Important: once the product has dried, and before trying to remove the paper/tape from the center of the frame, make sure that you score around the paper with a razor so your awesome design doesn’t come up with it.


Honestly, this project would have been easier if I would have removed the mirror from the frame.  I made quite a mess near the frame, so I made it part of the design and just wiped the area closest to the frame clean.  Yeah, I used a bunch of Q-tips and this is what it looked like once it dried:


Well, it was mostly dry at this point.  See what I mean about taking pictures of mirrors?  I actually like this shot because it shows the effect pretty well.  Not perfect, but that is just fine with me.  I wish you could see it in person.

Don’t you just love this quote?   It is by Gordon B. Hinkley and I adore it.  I just printed it up on aqua cardstock, cut it 4×4 inches, sprayed some spray adhesive on the back side and stuck it right in the middle.  Go ahead and print it up for yourself, if you want to.  Look closely at the cardstock.  Do you like the spotted bits?  Kind of goes with the distressed font (Attic), right?


The spots were a happy accident. I tried to distress the frame a bit with sandpaper, but it didn’t really show.  BUT, it got bits of black dust on the paper and I decided I liked it so I purposely added more, smashing it on with a paper towel.

A-ny-way… it is done and here it is!


Again, the little white bits are mostly dry.  Ain’t nobody got time to wait!  Oh, yeah.  I added a satin flower that I made a while back and I like the way it looks.

One more look?  O.K., fine.


Makes you want to run out to the craft store RIGHT NOW to get some Crystal Clear Gallery Glass Window Color, doesn’t it?  Go! I want to see what you create!


********* Linking up to these awesome parties!*********


DIY: Hip to Be Square Wreath

I like square stuff.  I’m not sure why, I just do!  Check it out…

Our table is square…


Our dishes are square.  You got me! I know the smaller white dishes are rectangles, but in my little world, I categorize them as square…my kindergarten teacher would be so disappointed.

If I had my dream home, it would be foursquare style:


Seriously,  you should Google “foursquare architecture images”.  You will need a rag to wipe the drool off of your face.

Well, it is Christmas time and I thought that I would share an insanely easy  DIY holiday wreath with you.


Call it rectangle, if you want.  I made this baby so many years ago.  Yeah, maybe time to change out the bow.  Anyway, I am going to show you how to make a square wreath.

You just need three things:  a frame without glass, cheap-o greenery garland (mine was 7 yards long), and a glue gun with glue sticks.  You will spend more time waiting for the glue gun to heat up than you will spend making this wreath.   Once it does, put a little dab of glue on the back of the frame ( I like to start in a corner) and then start wrapping.


Don’t wrap too tightly because you will want to manipulate it around until the whole thing is uniformly covered.  Then hot glue the end to the back.  Ta-dah!

You can add a bow and fru-fru if you want:


I kind of like mine a bit more plain :



And this is where it stays…for now.

What do you think?  Is it hip to be square?


PS. I linked up:

From Dollar Tree Halloween Plaque to Awesome Chalkboard


I have been working on decorating my front porch for Fall and realized that I was ready for new, new, new.  Just plain sick of the old, old, old.   I will post the before and afters tomorrow, but I wanted to give a sneak peak of a project that I did today that I am just plain excited about.  After walking around Michael’s, Target, Pier One, and a couple of thrift stores in town looking for something to hang on my door I was getting a bit frustrated.  Nothing excited me.  I had decided to get away from the “look at me, I’m a Fall color” colors this year and am going with a totally different color palette .  Basically gray, pewter, turquois and just a touch of orange.  Sound weird?  Tune in tomorrow, and see what you think.  An-y-way…last night I was in Dollar Tree and saw some MDF Halloween plaques and guess what?  I got inspired.  They have a few different  shapes to choose from and I grabbed this one:


Are you thinking what I’m thinking?  As I continued to walk around Dollar Tree I found the turquois  bow/ribbon (also pictured)  in the giftwrap section.  (Oh, just ignore the ivy-looking foam stamp in the bottom corner of the above pic… I decided to nix my idea for that.  Maybe another time.)  See where I am going with this?  No?  OK, keep reading.

I have always loved chalkboards and figured that this would be a great shape for one and remember…just one dollar!  Wanna see it, now that it is done?




Do you want to know how I did it?  First let me tell you the supplies that you need:  Black chalkboard paint, joint compound (there is likely some in your garage right now…if not, go ask a neighbor- you don’t need that much), masking tape (painter’s tape is preferred), your choice of paint color for the “frame”, Minwax stain (optional)- I used Ebony, chalk, paintbrush, scissors and, of course, the plaque and decorative bow & ribbon.  Oh, just a suggestion; some of the Dollar Tree plaques were kind of bent, find a straight one if you can.   Got it all?  Let’s go!

First of all, this plaque has great guide lines, making the taping off process really simple.  Use those lines and tape as shown below.  Since I didn’t want an arch on my chalkboard, I used the top edge as a reference point for leaving a frame border.  Note the tape that says “Remove” that  I put along the top. Just under that I added another piece of tape, the one that says, “Keep”.  Once that one is in place, remove the top piece of tape, as shown.


Now, for the fun part.  Spread a thin layer of joint compound outside of the tape line to form a textured frame.  I had planned that I would use the foam stamp to create texture, but decided that I am probably the only human on the planet with that exact stamp and nobody would be able to duplicate it, so I just used my fingers to form a random swirly texture.  Kind of similar to frosting a cake…except with your fingers.  Don’t worry, this stuff washes off of your hands and surfaces really easily.  Before the joint compound dries, remove the tape.   It should take less than 30 minutes to dry.  The edges will be all messy, but this is an easy fix.  Break off the larger chunks of dried joint compound and then wet your fingers to “sand” the edges smooth.  Super easy.  If you feel like the surface is too harsh looking, you can also go over that with your wet fingers.  Easy.


Next step, paint the center of the board with chalkboard paint.  Don’t tell anyone, but when I do small projects like this,  I use a hair dryer to speed up the drying process.  I once called a paint manufacturer to ask if it was ok to do that and the guy told me some mumbo-jumbo about the paint chemical reaction blah-blah-blah and it is not recommended.  Well, so far, so good.   The Paint Police haven’t come and taken me away yet.  I painted two coats, and with blow drying in between, it only took a total of less than 5 minutes before I was ready to paint the outside edge of the frame.  I wanted you to be able to see the texture, so I dry painted the “frame” with the chalkboard paint so it could show up in these pics.  Next step, re-tape the edge, in the same places as before,  right on top of the just painted chalkboard surface (this is why painter’s tape is preferred… the adhesive isn’t going to pull up the mostly dry chalkboard paint.  Hey, I’m impatient!).  This taping process is pretty easy since the joint compound formed a bit of a “lip”.  Now, paint your chosen framed color.  I just did one coat, but you can decide whether yours needs another or not.


For the look that I wanted, I added a bit of Minwax Ebony stain.  I like how it changes the color and makes the textures pop out a bit more.  You can use a wadded up paper towel to sop up extra stain if it gets darker than you want it to be, then remove the tape.  After leaving it in the sun (I’m impatient, remember?) for an hour or so I was ready to finish it.   Since the joint compound covered up the original holes. I had to uncover them by poking through from the front of the frame towards the back.   Ribbon came next. I could blah- blahabout how I did it, but I know that you can figure it out.  Suffice it to say that mine is a double layer ribbon hanger with extra bits of ribbon tied in a knot at the top to make it more frilly.  Lastly, I hot glued the ribbon bow to the chalkboard to up the WOW! factor.

So, here it is, hanging on my door.  What do you think?  In my next post I will let you know how I did my lettering.    D’ya like it?


This wordy-wordy detailed tutorial may disguise the fact that this project is actually very simple to do.  And, let me remind you…it is a super CHEAP project!   Run down to Dollar Tree right now while they still have their Halloween plaques. Christmas is coming and these will make great gifts!   Stay tuned for the porch reveal!