Did you hear a really loud scream today? A really high pitched squeal? Actually two of them? It was me! The first one was because of this:
If you can’t tell, it’s a SnAkE!!! A really big snake! That sidewalk there is 4 feet wide. Ugggggg……
My husband said that it is a “good” snake. No such thing!
Gives me the chills just to see a pic of it! That was my first squeal and THIS was my second
I made a foam rubber stamp! All by myself! From scratch! Squeal! Want to know the best part? It wasn’t that hard to do. YOU can totally do this, too.
Here is what you will need:
- Two paper copies of the design that you want to make into a stamp. You can even just type out a name, a word or a phrase like, “Happy Birthday!” in Word.
- Scissors
- A sheet of craft foam. I bought this blue sheet at Walmart and it is quite thin. I’m sure that Michaels or Joann’s or any craft supply store carries thicker foam sheets.
- Spray adhesive
- Something to use as a sturdy stamp base. I just cut a piece of wood to size.
- Baby powder (you’ll see in a minute)
- An ink pad
I got the idea after watching this awesome YouTube tutorial.
First of all I chose the letter A in the Damask Dings font (dingbat) and, in Word resized it to the size that I wanted. I made two copies of this…hang on and you’ll see why.
My printer is out of toner so I had to color in the lines a bit so you can see the image. See it? Good. Next I roughly cut around my design (only one of the copies), sprayed adhesive on the back and immediately stuck it on the foam board.
At this point I cut around my printed design, and here is where my second copy came into play: As I cut each piece out, I placed it on top of the copy (paper side up) so my placement would be exactly like the original. I ended up using a hole punch to cut out the smaller circles. I’m lazy you know! Actually it was to get perfect little circles.
Next, I cut a piece of foam a bit bigger than the size of the design, sprayed some adhesive to cover the surface and then layed it down, sticky side down, on top of the image. This is how you capture the design in place. If it looks a bit wonky, you have a minute or so to adjust the pieces.
Now the foam backer is all sticky, what to do, what to do? Baby powder, of course! Sprinkle some on the exposed sticky parts, rub it in with your finger, then gently wipe the powder off:
Smooth as a baby’s bottom.
Before mounting the stamp, I inked it up and then stamped directly on the wood. After letting it dry for a minute I mounted the foam on the side opposite of the stamped image. This is where it would have been nice to have better quality foam. With this thin foam I just have to be very careful when inking. Kind of messed up the wood block, but it’s not the end of the world. As you can see, my stamp works just fine.
Made by ME! Squeal! (Did you hear that?!) Since there is a layer of paper sandwiched in there, I wouldn’t recommend washing the stamp under running water. To clean it, just stamp over and over on a damp paper towel until the color is gone.
I have a couple of really great ideas for using foam stamps. I promise to share them soon!
********* Linking up to these awesome parties!*********
I cannot wait to try this! How fun. I really want to retire and just try all the neat ideas that you show on your blog.
I’m excited to show you my Grandmother’s dresser the next time you visit. I chalk painted it “Paris grey” & lightly ghosted a harlequin diamond design on the sides. I am going to decoupage a small picture of her as she looked when she and my Grandpa were courting on one side in the upper corner, just a sentimental tribute. I hope to see you soon!
SNAKES! UGH! Me no like!
Patrice
LikeLiked by 1 person
Silly me! I just emailed you, asking if you had seen this post, knowing that it is right up your alley. I can’t wait to see your dresser. Take a pic of it, please, and email it to me. If you ever do a project like that, take some before and after pics and I will add it to my blog. With your permission, of course!
LikeLike
I love your tips on getting the stamp just right. I would never have thought to use baby powder!
LikeLiked by 1 person
Why, thank you! Yep, the baby powder immediately takes the tackiness away. Thanks for stopping by!
LikeLike
I hate snakes, but love your stamps, look pretty! 🙂
LikeLiked by 1 person
Why, thank you!
LikeLike
Love this idea because I often have to buy a set of stamps just to get the one I want – going to try making my own soon!
LikeLiked by 1 person
Stamp sets are great for those selling the stamps…not so great for us who just want to buy one. I would love to see what stamps you make!
LikeLike
Oh I hate snakes too. I have screamed before when seeing one in my yard. The rubber stamp looks like a fun project.
LikeLiked by 1 person
I screamed so loud at a friend’s house once when I saw her son’s toy snake that all of the neighborhood dogs barked for half an hour. Fun project for sure!
LikeLike
Great job! I must try this soon. Thanks for linking up to the Bloggers Brags Pinterest Party. I have pinned to the Bloggers Brags Broad.
LikeLiked by 1 person
Thanks so much! I love visiting Bloggers Brags!
LikeLike
Wow! I had no idea you could do this! Thanks for sharing at Tips & Tricks! 🙂
LikeLiked by 1 person
I was amazed myself. Thanks so much stopping by!
LikeLike
What a neat idea! I would love to try this on fabric. Thanks for sharing at The Creative Circle.
LikeLiked by 1 person
What a great idea to use on fabric! I’m definitely going to do that! Thanks for the idea!
LikeLike